 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CFY67 HiRel K-Band GaAs Super Low Noise HEMT * * * * * * * HiRel Discrete and Microwave Semiconductor Pseudo-morphic AlGaAs/InGaAs/GaAs HEMT For professional super low-noise amplifiers For frequencies from 500 MHz to > 20 GHz Hermetically sealed microwave package Super low noise figure, high associated gain Space Qualified ESA/SCC Detail Spec. No.: 5613/004, Type Variant No.s 01 to 04, 05 foreseen (tbc.) 4 3 1 2 ESD: Electrostatic discharge sensitive device, observe handling precautions! Type Marking Ordering Code Pin Configuration 1 2 S 3 D 4 S Package CFY67-06 (ql) CFY67-08 (ql) CFY67-08P (ql) CFY67-10 (ql) CFY67-10P (ql) - see below G Micro-X CFY67-nnl: specifies gain and output power levels (see electrical characteristics) (ql) Quality Level: P: Professional Quality, H: High Rel Quality, S: Space Quality, ES: ESA Space Quality, Ordering Code: Ordering Code: Ordering Code: Ordering Code: Q62702F1699 on request on request Q62702F1699 (see order instructions for ordering example) Semiconductor Group 1 of 10 Draft D, September 99 CFY67 Maximum Ratings Parameter Drain-source voltage Drain-gate voltage Gate-source voltage (reverse / forward) Drain current Gate forward current RF Input Power, C- and X-Band 1) Junction temperature Storage temperature range Total power dissipation 2) Symbol VDS VDG VGS ID IG PRF,in TJ Tstg Ptot Tsol Values 3.5 4.5 - 3... + 0.5 60 2 + 10 150 - 65... + 150 200 230 Unit V V V mA mA dBm C C mW C Soldering temperature 3) Thermal Resistance Junction-soldering point Notes.: Rth JS 515 (tbc.) K/W 1) For VDS 2 V. For VDS > 2 V, derating is required. 2) At TS = + 47 C. For TS > + 47 C derating is required. 3) During 15 sec. maximum. The same terminal shall not be resoldered until 3 minutes have elapsed. Semiconductor Group 2 of 10 Draft D, September 99 CFY67 Electrical Characteristics (at TA=25C; unless otherwise specified) Parameter Symbol min. Values typ. max. Unit DC Characteristics Drain-source saturation current VDS = 2 V, VGS = 0 V Gate threshold voltage VDS = 2 V, ID = 1 mA Drain current at pinch-off VDS = 1.5 V, VGS = - 3 V Gate leakage current at pinch-off VDS = 1.5 V, VGS = - 3 V Transconductance VDS = 2 V, ID = 15 mA Gate leakage current at operation VDS = 2 V, ID = 15 mA Thermal resistance junction to soldering point IDss -VGth IDp 15 0.2 30 0.7 < 50 60 2.0 mA V A -IGp - < 50 200 A gm15 50 65 - mS -IG15 - < 0.5 2 A Rth JS - 450 - K/W Semiconductor Group 3 of 10 Draft D, September 99 CFY67 Electrical Characteristics (continued) Parameter Symbol min. Values typ. max. Unit AC Characteristics Noise figure 1) VDS = 2 V, ID = 15 mA, f = 12 GHz CFY67-06 CFY67-08, -08P CFY67-10, 10P Associated gain. 1) VDS = 2 V, ID = 15 mA, f = 12 GHz CFY67-06 CFY67-08, -08P CFY67-10, 10P Output power at 1 dB gain compression 2) P1dB VDS = 2 V, ID = 20 mA, f = 12 GHz CFY67-06, -08, -10 CFY67-08P, -10P Notes.: 1) Noise figure / sssociated gain characteristics given for minimum noise figure matching conditions (fixed generic matching, no fine-tuning). 2) Output power characteristics given for optimum output power matching conditions (fixed generic matching, no fine-tuning). 10.0 11.0 11.0 Ga 11.5 11.0 10.5 12.5 11.5 11.0 dBm NF 0.5 0.7 0.9 0.6 0.8 1.0 dB dB Semiconductor Group 4 of 10 Draft D, September 99 CFY67 Typical Common Source S-Parameters CFY67-08: V DS = 2 V, I D = 15 mA, Z o = 50 f |S11| 5 of 10 Draft D, September 99 CFY67 Typical Common Source S-Parameters (continued) mA, Z o = 50 |S22| 6 of 10 Draft D, September 99 CFY67 Typical Common Source Noise-Parameters V DS = 2 V, I D = 15 mA, Z o = 50 NF min Rn | opt | < opt [dB] [magn] [angle] [] 0,29 0,756 14 15,60 0,30 0,690 28 14,65 0,34 0,643 43 13,56 0,38 0,606 58 12,10 0,41 0,578 73 10,53 0,46 0,553 87 8,86 0,50 0,534 102 7,16 0,55 0,518 116 5,62 0,60 0,505 131 4,29 0,64 0,495 145 3,23 0,69 0,486 159 2,53 0,73 0,476 173 2,22 0,78 0,467 -173 2,37 0,84 0,455 -160 2,96 0,88 0,443 -146 4,01 0,93 0,428 -132 5,47 0,99 0,412 -118 7,26 1,05 0,394 -103 9,61 CFY67-08: f [GHz] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Semiconductor Group 7 of 10 Draft D, September 99 CFY67 Order Instructions: Full type variant including quality level must be specified by the orderer. For HiRel Discrete and Microwave Semiconductors the ordering code specifies device family and quality level only. Ordering Form: Ordering Code: Q.......... CFY67 -(nnl) (ql) -(nnl) Noise Figure/Gain and/or Power Level (ql): Quality Level Ordering Example: Ordering Code: Q62702F1698 CFY67-08P ES For CFY67, Noise Figure/Gain/Power Level 08P: NF < 0.8 dB, Ga > 11.0 dB, P1dB > 10 dBm @ 12 GHz in ESA Space Quality Level Further Informations: See our WWW-Pages: - Discrete and RF-Semiconductors (Small Signal Semiconductors) www.infineon.com/products/discrete/hirel.htm - HiRel Discrete and Microwave Semiconductors www.infineon.com/products/discrete/hirel.htm Please contact also our marketing division : Tel.: Fax.: e-mail: Address: ++89 234 24480 ++89 234 28438 martin.wimmers@infineon.com Infineon Technologies Semiconductors, High Frequency Products Marketing, P.O.Box 801709, D-81617 Munich Semiconductor Group 8 of 10 Draft D, September 99 CFY67 Micro-X Package Published by Infineon Technologies Semiconductors, High Frequency Products Marketing, P.O.Box 801709, D-81617 Munich. Infineon Technologies AG 1998. All Rights Reserved. As far as patents or other rights of third parties are concerned, liability is only assumed for components per se, not for applications, processes and circuits implemented within components or assemblies. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. For questions on technology, delivery and prices please contact the Offices of Semiconductor Group in Germany or the Infineon Technologies Companies and Representatives woldwide (see address list). Due to technical requirements components may contain dangerous substances. For information on the type in question please contact your nearest Infineon Technologies Office, Semiconductor Group. Infineon Technologies Semiconductors is a certified CECC and QS9000 manufacturer (this includes ISO 9000). Semiconductor Group 9 of 10 Draft D, September 99 |
Price & Availability of CFY67
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |